Metal Casting Molds and Learn About Making Molds for Metal Casting Information
Posted on June 7, 2008
Filed Under Uncategorized |
Metal Casting Molds, Ingot Mold, and Cold Mold are just a
few types of Casting Molds. Learn about Making Molds for Metal Casting.
Casting
molds are an essential part of the metal casting process as it will be used to
shape the final result. Nearly all metal casting methods will use some type of
mold. The standard mold will consist of a cope and drag that when together is
called a flask. The mold itself can be constructed of several materials
depending upon the casting method.
Most molds will be made from latex, fiberglass, sand, and even metal. Sand
molds are the most popular since Sand Casting is commonly used in small home
foundries. In Permanent Mold Casting, the mold is created from metal. Most
molds can be used over and over again, but not all of them. Certainly the metal
molds can be used multiple times without loosing any quality from the finished
product. However, molds created using sand or other materials will not have a
very long shelf life. This is not generally seen as a huge problem just a
minor annoyance since mold making is relatively cheap and easy.
No matter what material the mold is made from, the basic construction is pretty
much the same. The molding box is called the flask which has a cope, the top,
and drag, the bottom. You will then fill the flask with the molding
material and then place the original into the mold. So, if you want to cast a
tiny metal elephant, you will place an original of the elephant usually made
from clay, wax, wood, or even metal into the drag of the flask. If this is done
in sand you will ram the flask until the sand is packed tightly around the
original. The top of the flask, the cope is then placed on and more molding
material poured in. The entire flask is then rammed or vibrated making sure
everything is packed in nice and tight.
When the molding material is dry, you will remove the flask and carefully split
the mold to retrieve the original, in this case the tiny elephant. Now, if you
want to make sure that there are some empty spaces in the cast to be finished
then you will place cores into the mold. The cores are made of sand or wax.
The type of mold used depends heavily on the type of casting, alloy, and
complexity of the pattern to be cast. Metal molds have little use in small
foundries unless you plan on casting a lot of tiny metal elephants.
In some cases, pre-made molds can be found in hobby shops or through company
casting companies. Usually, pre-made molds are used in miniature castings. Many
individual metal casters prefer to make their own molds since it is inexpensive
and allows them greater control over the finished casting.
Metal casting involves several sets of skills and mold making is one of these
skills. Mold making is an invaluable skill for metal casters as it is so very
important to the casting process. Not only are molds used in metal casting but
in other casting types as well. Resin casting and other plastic casting
requires a mold as well. The flask can be made of wood, metal, and in some
cases those toy building blocks , we all know the type. As long as the flask can
hold the mold material until it dries it can be used.
Every metal caster should learn how to make a mold instead of relying on
others. It’s not only about independence but about saving money as well. Making
your own mold is just cheaper.
About the author
Go to Metal Casting Zone to get
your free ebook on Metal Casting. Metal Casting Zone also has a Metal Casting Forum, Sand
Casting Information, and a Metal
Casting Blog with daily news on Casting. Go to www.metalcastingzone.com to visit
the site.
Tags: asa, basic construction, elephant, fiberglass, final result, finished product, flask, foundries, ingot mold, latex, metal casting, metal molds, minor annoyance, molding material, multiple times, permanent mold, sand casting, sand molds, shelf life, tiny metal
Related Posts
- mit title in all CAPS and more than 100 characters
- Die Casting Process, Cold Chamber Process, Hot Chamber Process
- Casting Patterns and Metal Casting Information
- Jewelry Making Supplies and Jewelry Making Basics Explained
- Metal Casting Associations and Metal Casting Groups
Comments
Leave a Reply